• Package: Plastic bottle 25gr. ±5%. 
• Type (visually): Pearls.
• Colour (visually): White.  
• Purpose: for photoresist developing and removal.
• Thinner: Water.

Instructions for use:

 - Developing:
Pour the content of the package in non-metallic container, then add 1.5l. of water and mix slowly until the content dissolves. Immerse the scanned board in the solution. Recommended solution temperature 20-25°С. Place the board in the solution. А foil picture is developed when mixing the solution for a while. Once PCB developing has finished wash it well with cool water. You can pass to PCB etching.
 - Removing the photoresist lacquer: 
Once etching finishes the board has to be well washed with water. Pour the content of the package in a non-metal container then add 0.750l. water and mix until the content dissolves. Recommended solution temperature 30-35°С. Immerse the board in the solution and mix until the photoresist lacquer completely removes from the board. You have to wash the board with cool water.

• Storage requirements: maximum storage temperature to 30ºС. Keep in original, tightly closed packages, in dry indoor areas, away from direct sunlight.
• Expiration: 2 years after first opening.
• Warning of danger:
  - R35 - Causes severe burns.
  - S26 - In case of contact with eyes to be rinsed intensively with water and medical aid is advised (show the label where possible).
  - S36/37/39 – Wear suitable protective clothing, suitable gloves and eye and face protection.
  - S45 - In case of accident or if you feel unwell seek medical advice immediately (show the label where possible).
• SAFETY MEASURES:
  - If inhaled: Fresh air.
  - If in contact with skin: Immediately wash the skin. Immediately change the clothing.
  - If in contact with eyes:Wash intensively eyes with water with eyelid held wide opened.
  - If swallowed: Drink generous amount of water. Do not induce vomiting because of risk of perforations.
  Do not try to neutralize.
  - Get medical advice/attention!